Fluke 62 Max+ Infrared Thermometer

Fluke 62 Max+ Infrared Thermometer

Built for fast spot measurements in industrial and facilities work, the 62 MAX+ uses dual lasers to show the measurement area, while the 12:1 D:S ratio helps you judge how close to stand for the surface size you need to measure. The IP54 enclosure protects against dust and splashes, and the 3m drop rating adds extra peace of mind. A single AA battery powers the unit, with a response time under 500ms for snappy readings.

Typical applications

•  Quick checks on motors, bearings, and panels
•  HVAC supply and return temperature comparisons
•  Food service surface checks where non contact is required
•  General maintenance and troubleshooting

Why this model

•  Non contact measurement −30°C to 650°C
•  Accuracy ±1.0°C or ±1.0% of reading
•  12:1 D:S for practical working distance
•  Dual rotating lasers for clear targeting
•  IP54 sealing and 3m drop rating for site use

Spec summary

•  Temperature range −30°C to 650°C
•  Accuracy ±1.0°C or ±1.0% of reading
•  Optics 12:1 distance to spot ratio
•  Targeting dual rotating lasers
•  Ingress protection IP54, 3m drop tested
•  Response time <500ms
•  Power 1×AA battery

Fluke 62 Max+ FAQs

How do the dual lasers help.
They mark the area being measured, making it easier to aim accurately at the target spot.

How close do I need to be for small targets.
Use the 12:1 D:S rule. At 12cm distance you measure a 1cm spot. Move closer for smaller areas.

Can I use it outdoors or in plant rooms.
Yes, the IP54 rating resists dust and moisture, and the 3m drop rating suits tough conditions.

Is this thermometer contactless.
Yes, it is an infrared, non contact thermometer designed for quick surface checks.

Can you calibrate this instrument.
Yes, we can supply or arrange calibration. See our Calibration service for details.

Helpful links

See all Environmental & Temperature

Need a calibration certificate